Saturday, May 31, 2014

Ohio SB 310: Energy Users Best the Cronies (GE, AWEA, etc.)

“But the truth is that Ohio’s renewable energy mandates have largely benefited only one group: entrenched monopoly fossil utilities like AEP, Iberdrola, and corporate behemoths like GE.”

Senate Bill 310’s attempt to freeze Ohio’s renewable energy mandate has elicited the typical partisan howls from Ohio’s green energy profiteers. They have been quick to paint the supporters of SB310 as slavish supporters of the much maligned Koch Brothers, FirstEnergy or other “dark fossil corporate profiteers”.

Curiously, these environmental group’s normally exquisitely tuned “corporate conspiracy radar” appears to have developed a massive wind-turbine-sized blind spot.

Consider:

  • In 1998 it was Enron’s Ken Lay who  implored George W. Bush to extend subsidies for wind energy.  A quick scan of his letter reveals talking points that today could easily be mistaken for the Ohio Sierra Club: “Wind is the fastest growing new electrical generation technology in the world today and has rapidly decreased its production costs until it is close to being competitive with conventional generation technologies.”
  • But as shown by Sierra’s willingness to take $26 million from gas driller Chesapeake Energy to fight coal, their policy positions can be very nimble indeed-for a price.
  • After Enron’s epic fail their wind business was scooped up by General Electric. GE’s power generation unit saw great opportunity in the growing alarm over global warming.

Traditional coal plants last a very long time, 60 years or more. It is hard to sell new plants when they obsolesce so slowly. But if new CO2 regulations could begin to force premature retirement of still-serviceable coal plants, GE could fill that generation void with new gas generation. Every megawatt of retired coal generation could then be replaced with new (GE)  gas generation.

That is a fine start but what if there were a way to sell two or three or four megawatts (MW) of new capacity to replace one MW of prematurely retired coal generation?

Intermittent wind energy that is wholly reliant upon gas generators for grid integration was the key. But how to create a market share for expensive wind energy which typically arrives at times of low demand and low price?

Enter state renewable energy mandates like Ohio’s SB221.

GE’s business is generators. As board members of the American Wind Energy Association (AWEA) they have been at the vanguard of promoting and protecting renewable energy mandates. Since wind energy is variable and intermittent in output due to the vagaries of weather, one cannot simply replace 1,000MW of baseload coal generation with 1,000MW of wind generation.

Replacing such a coal plant with wind generation requires one to construct approximately 1,000MW of gas-fired generation to balance and backup wind’s erratic output. For GE that is win-win. They get to sell 2MW of new generation to replace 1MW of perfectly serviceable coal generation being prematurely retired by EPA regulations.

But even better for GE is the fact that wind turbines last 20 years- at best. Thus, over the 60 year life of a typical coal plant, not only do ratepayers need to pay for a new 1,000MW (GE) gas generator, they are also compelled to buy 1,000 MW of  GE wind turbines AND replace them at least two more times over 60 years.

Thus, through the magic of EPA regulation, coupled with high level PR  air support from willing accomplices like Sierra Club and furthered by renewable energy mandates like the one SB310 hopes to freeze, corporate giant GE has struck a largely tax free green bonanza.

Our “corporate conspiracy” search does not end there. A quick review of the AWEA’s  board of directors reveals an interesting cast of fossil fuel characters indeed.

Iberdrola Renewables’ corporate parent is among the largest fossil  utilities in Europe. An aggressive opponent of SB310, Ohio wind operator Iberdrola also owns significant fossil fuel generation in the US. Wind works well for Iberdrola:  in just one year their US wind investments allowed them to strip mine  $1 billion from the US tax code and export it to Spain.

Along with German utility E. On Energy and  FPL/NextEra, Ohio’s fossil giant AEP also enjoys a place on the AWEA board. Could it be that wind subsidies are really just more fossil subsidies?

There are many solid reasons for Ohioans to support freezing  renewable energy mandates.

SB221’s  instate renewable energy generation mandate violates the Commerce Clause of the U.S. Constitution. Worse, Ohio’s wind resource is anemic relative to its western peers. This means OH wind is roughly twice the price of Iowa’s or Minnesota’s.

Still worse for Ohio’s environment, the center/left Brookings Institute, deeply concerned about climate change, now reports that wind and solar energy mandates like SB221 are the most costly and least effective means of reducing greenhouse gas emissions.

Anyone can play “find the (Koch) bogeyman”.

But the truth is that Ohio’s renewable energy mandates have largely benefited only one group: entrenched monopoly fossil utilities like AEP, Iberdrola, and corporate behemoths like GE.

But what should we expect? It was their idea in the first place.

The good news appears to be that Ohio will stop the renewable charade. Tom Stacy, an “Ohioan for Affordable Electricity,” offers his plaudits for Substitute SB 310 that  passed the Ohio House and Senate and now awaits gubernatorial approval to become law.

Appendix: Tom Stacy on Ohio Win

“This is a win for ratepayers, Ohio’s economy and its environment,” he said. “Ratepayers can rest assured that rates won’t rise due to ‘self inflicted measures’ at the state level even while their federal government’s EPA has us in a head lock.”

Ohio’s bread and butter industries and employers are energy intensive, some consuming as much as $200,000 worth of electricity per employee per year.  Escalating costs could have catastrophic effects on wages, benefits, expansion plans and even employment if any one of those manufacturers ‘pulls the plug’ on Ohio operations due to escalating energy costs and projections.”

“From the environmental side, it is unfortunate groups such as Sierra Club, Greenpeace, Union of Concerned Scientists, Natural Resource Defense Council and others whose stated mission and public image is environmental improvement often have agendas that prevent pursuing such laudable goals in the most cost effective ways. Some appear to despise wealth in general – even earned and well deserved wealth.

How Un-American!  Some hate cronyism – so do tea parties – but fail to admit that renewables like wind are some of the worst offenders in that department.  And some just hate the idea that man benefits from fire, something cavemen discovered and we’ve been better off ever since.”

“The study committee will hopefully add a so-far-woefully-absent dimension to energy and environment policy: evaluating both the direct and indirect costs and benefits of various electricity source options, while recognizing that per unit cost of  intermittent sources of electricity cannot and should not ever be directly compared to the cost of dispatchable sources.”

“It would be really meaningful for the study committee to propose an end goal measured in PPM and cents per KWh instead of just mandating large percentages of somebody’s favorite technology and then taking their word that it will magically cure all ails.

The study committee may move us in that direction.  We are confident it will balance everyone’s desire for standard of living improvement, high employment, low rates and less wasted taxes.  Maybe these are even as important as ever cleaner air and water and ever less changing climates, considering the US is already a global leader in emissions standards.”

“This bill has the potential to raise political and public awareness of not just electricity choices, but the very closely related choices between socialism and capitalism.  The idea of ‘all of the above’ translates to ‘some of the ridiculous.’  What we need is an ‘all of the competitive’ energy policy, and Ohio has taken a small step in that direction through the passage of Am. Sub. SB 310.”

Source: http://www.masterresource.org/2014/05/ohio-senate-bill-310-why-is-good-news-for-energy-users-bad-are-journalists-as-crony-as-crony-capitalists/

electrician contractor contractor electrician

Infrared Thermo - The Language of Heat

Infrared Thermal imaging tells an electrical story

Picture 6 Infrared Thermo   The Language of Heat In EC&M Magazine October 2013 issue they discuss utilizing infrared thermography for your predictive and preventive maintenance program. Some points to take away:
•Used competently and intelligently, infrared imaging  used to pinpoint abnormally high or rising heat from resistance in electrical circuitry… can save money.
•Like Any Tool, Infrared Thermography is only as good as the Operator.
•The Technology Requires Both Operator Expertise and a Game Plan for Using It.
•In trained hands – and when integrated into a broader predictive and preventive electrical maintenance program – it can be used to get out in front of costly electrical breakdowns.
•Elements of a strong IR Thermography report generally include a detailed description of equipment, good images, description of the problems, testing conditions, a severity ranking, and recommended actions.
•Common mistakes inadequately trained imagers make, may include taking readings through cabinet doors and covers, not controlling for target emissivity and reflectivity that can produce false readings; and failing to understand how target distance and angle impact readings.
•You need equipment to run under normal operating conditions for thermal imaging to be meaningful.
•A long term imaging plan can be based on factors including reliability demands, component-specific findings, budget considerations, manufacturer recommendations, and even insurer thermography requirements.


ico tag Infrared Thermo   The Language of Heat Tags:  

Del.icio.us
delicious Infrared Thermo   The Language of Heat
Facebook
facebook icon Infrared Thermo   The Language of Heat
TweetThis
tweet Infrared Thermo   The Language of Heat
Digg
digg Infrared Thermo   The Language of Heat
StumbleUpon
stumble Infrared Thermo   The Language of Heat


Copyright © Cooper Electric [Infrared Thermo - The Language of Heat], All Right Reserved. 2014.

Source: http://cooper-electric.net/infrared-thermo-the-language-of-heat/

electrical maintenance electrician certification electrical contracting contracting electrical emergency electrician

The Benefits of Hiring a Professional San Dimas Electrician

If you are like most homeowners, changing a light bulb is about the extent of your electrical repair abilities. Fortunately, there are qualified San Dimas electrical repair contractors just a phone call away. Electrical repairs are one of those things that homeowners eventually have to contend with, and there are several issues at stake that warrant a second thought about any D.Y.I. ideas or who the best option to hire is.

The biggest and probably most important issue regarding electrical repair is safety. Most homeowners do not have the proper training to go mucking about with wiring, outlets and breakers. There is a good chance of coming into contact with electricity and some homeowners are not even aware of how to turn off the electricity to their home, which is important in the prevention of electrocution. Furthermore, if electrical repairs are not completed correctly, there is the chance of an electrical fire starting later on. What is risky for a homeowner to try on their own can quickly become a life or death matter for everyone living at the residence.

Another important issue in electrical repair is the ability of inexperienced people spreading damage to other parts of the home. An expert San Dimas electrical contractor can isolate electrical problems and contain them. They can tell if it can affect other parts of the house or whether a problem elsewhere is causing the problem that you notice. And goodness forbid if an inexperienced person were to get in there and end up destroying your home’s electrical system due to unwitting error.

The last important issue that should not prevent you from calling a professional San Dimas electrician is cost. While considering cost is important in this day and economy, the cost of getting something done right is never too high. Plus, getting it done right the first time prevents more repair down the road, meaning more out-of-pocket expenses.

Source: http://www.accurateelectricalservices.com/CA-Electrician/electrical-contractor/benefits-hiring-professional-san-dimas-electrician

electrical contractors company certified electrician

Infrared Thermo - The Language of Heat

Infrared Thermal imaging tells an electrical story

Picture 6 Infrared Thermo   The Language of Heat In EC&M Magazine October 2013 issue they discuss utilizing infrared thermography for your predictive and preventive maintenance program. Some points to take away:
•Used competently and intelligently, infrared imaging  used to pinpoint abnormally high or rising heat from resistance in electrical circuitry… can save money.
•Like Any Tool, Infrared Thermography is only as good as the Operator.
•The Technology Requires Both Operator Expertise and a Game Plan for Using It.
•In trained hands – and when integrated into a broader predictive and preventive electrical maintenance program – it can be used to get out in front of costly electrical breakdowns.
•Elements of a strong IR Thermography report generally include a detailed description of equipment, good images, description of the problems, testing conditions, a severity ranking, and recommended actions.
•Common mistakes inadequately trained imagers make, may include taking readings through cabinet doors and covers, not controlling for target emissivity and reflectivity that can produce false readings; and failing to understand how target distance and angle impact readings.
•You need equipment to run under normal operating conditions for thermal imaging to be meaningful.
•A long term imaging plan can be based on factors including reliability demands, component-specific findings, budget considerations, manufacturer recommendations, and even insurer thermography requirements.


ico tag Infrared Thermo   The Language of Heat Tags:  

Del.icio.us
delicious Infrared Thermo   The Language of Heat
Facebook
facebook icon Infrared Thermo   The Language of Heat
TweetThis
tweet Infrared Thermo   The Language of Heat
Digg
digg Infrared Thermo   The Language of Heat
StumbleUpon
stumble Infrared Thermo   The Language of Heat


Copyright © Cooper Electric [Infrared Thermo - The Language of Heat], All Right Reserved. 2014.

Source: http://cooper-electric.net/infrared-thermo-the-language-of-heat/

electrical installation contractors electric electric contractors electrical repair commercial electric

The Importance of Installing Whole House Surge Protection – Residential Electrician Broward

Bob Frank, owner of Perfect Electric and Air Services, is discussing in this video the importance for a whole house surge protection and the couple of different ways of doing it. Whole House Surge Protection is important to protect all valuable electronics and appliances inside of your home in the case of an unexpected electrical [...]

Source: http://www.perfectelectricrepairs.com/2013/the-importance-of-installing-whole-house-surge-protection-residential-electrician-broward.html?utm_source=rss&utm_medium=rss&utm_campaign=the-importance-of-installing-whole-house-surge-protection-residential-electrician-broward

general contractor electrical supply

The Future’s So Bright, You Gonna Need Shades

No, not sunglasses — “solar-adaptive shading solutions.”

See this article on daylighting and the use of automated shades from REalcomm (from which the graphic below emeanated).

Fig2Jan30Adv

Caption from the article:

Figure 2: Automated shades can extend the useful daylight zone to significantly increase lighting energy savings.

Source: http://electricalcontractor.com/?p=14200

master electrician electrical business electrical technician master electricians electrical construction

The Solar PV Challenge REMAINS

The USDOE recently held an event on its SunShot Challenge — it’s over. See conference stuff here.

Screen Shot 2014-05-30 at 8.08.17 AM

Lots of info online, including bios of one heck of a lot of speakers. See, for example, this coverage of “the final 40%” thinking.

Source: http://electricalcontractor.com/?p=14191

contracting electrical emergency electrician

Glendale Surge Protection Will Keep You Grounded

Increasingly, Glendale residents find themselves more and more dependent on electrical devices in this modern world. Our DVD players, gaming systems, microwaves and of course our computers are important to our quality of life and communication with our family, friends and in some cases, work contacts.

Considering also that these electronic devices are not always cheap to replace and contacting a Glendale electrician isn’t an option to fix these devices, it is a good idea to consider the following in an effort to prevent damage from electrical surges or spikes.

What is an electrical surge or spike?

Electrical surges or spike events are typically defined as a “large current/voltage transients that occurs in an electrical signal or the power-line.”

Basically, it’s when the power line gets hit with a little extra “juice” for a few nanoseconds, due either externally to something like a lightening strike or internally due to  a device that require extra energy to turn on, like a refrigerator or air conditioning unit.

What is the best way to protect my sensitive electronics?

Keep electrical devices unplugged when not in use. Electrical surges can be devastating to any electronic that is plugged in to an outlet, even if the machine is turned off.

A common way to protect many of your electronics is to use a “power strip” that contains surge protection circuitry. They are available at many Glendale office and home supply stores and are usually clearly marked with surge protection status.

Use caution in using surge protectors, however. As they absorb energy from surges, they can wear out over time. Replace them every three years or when the “protected” light that comes on most of them goes out.

By using just a little bit of caution, you can save your sensitive electronics from an early death and save your phone calls to a Glendale electricial contractor for the big stuff.

Source: http://www.accurateelectricalservices.com/CA-Electrician/electrical-contractor/glendale-surge-protection-grounded

electrical inspection electrical maintenance electrician certification electrical contracting contracting electrical

Friday, May 30, 2014

Save Money On Your Electric Bill

SRP and APS provide rebates for your business to change its T12 lamps to more energy efficient T8 lamps. They are giving away money to help you save money on your electric bill! If you think it’s too good to be true, call us today and let us do a free energy audit on your […]

Source: http://blog.atselectricinc.com/2014/05/save-money-on-your-electric-bill/

find a contractor electrical installations

Contemporary Modern Lighting Illuminates Any Home

Decorating your home can be quite a challenge if you are not up to the task. You need to decide on the color that you want for your walls. You need to consider the tiles you will put on the floor. You also have to give some thought to the lighting fixtures you will have installed. Given that every decision you make is vital in giving you the design of your home that you desire, the number of contemporary modern lighting fixtures available is enough to confuse anyone in their quest to make the right decision.

Of course, you will find that your tastes and personal preferences will naturally come into play. Then there is also the issue of the current design or style of your home. In short, zeroing on the exact style that you want for your interiors is difficult enough. How much more could finding the right contemporary modern lighting fixture be? It sure does not help that today’s contemporary modern lighting fixtures comes in a wide variety of shapes and colors. Nevertheless, putting all that difficulty aside, you just need to read this article so that you can get a few ideas that will enlighten you (pun intended) regarding all the ways you can light up your home.

So, how do you pick the right contemporary modern lighting fixture for your home? the following are some helpful hints which you can use.

- Floor lamps 
Modern homes can benefit from contemporary floor lamps. These floor lamps are made from different materials – wood, metal and combinations of both. If you want something interesting, you can go for those with unusual yet attractive designs. Just be sure to pick floor lamps that go well with the other pieces that are present in the room. Dare to be creative? Pick floor lamps with bold colors. They will surely provide illumination as well as liven up your room.

- Side lamps 
For lamps to adorn side tables, you can opt for contemporary side lamps. These lighting solutions can give an otherwise drab room a dash of color. Of course, when you want some vibrancy in the room, you have to choose acrylic side lamps that come in different shades – blue, red, pink, orange, purple, and loads more! Then there are chrome side lamps that go well with chrome furniture. If you are not one to experiment, you can pick side lamps with wooden designs. These go well with wooden furnishings.

- Chandeliers and ceiling lights 
There are now more options to choose from when it comes to chandeliers and ceiling lights. You can take your pick from different designs to complement the room you intend to install a chandelier in. Plus, your room can get a whole new look when you pick interesting ceiling lights to give you the illumination you need.

Source: http://www.accurateelectricalservices.com/CA-Electrician/lighting/contemporary-modern-lighting-illuminates-home

electrical tools electric work electrical services electrical parts home contractors

Claremont Electric Floor Heating Systems

Claremont electric floor heat systems are used to warm up the entire floor in your living room or office room with electric mechanisms. With these heating systems, you can enjoy the comfort of warm floors even in bone chilling winter season when there is snow all around.

Most of these electric floor-heating systems provide soothing comfort and consistent even heat for your Claremont floor. The floor can be of any type or shape, such as tile, stone, laminate, and engineered wood floors without cold spots. Most of these heating systems are easy to install, energy efficient, and can be controlled using a variety of programmable and non-programmable thermostat options.

Radiant floor heating has improved drastically when it comes to efficiency and working mechanism along with other safety and user-friendly features.   The floor radiates heat to your feet, warming you all over. Most familiar are hydronic systems that heat your entire house.  A simpler, less expensive alternative for just a single room is electric floor heat systems. They are easy to install and inspect. Due to their simple mechanism, you can install it in your Claremont home with far less trouble and expense than you might expect.

Claremont electric floor heat systems consists of thin heating cables, like the wires in an electric blanket, installed under ceramic tile. It is because of these thin wires that they do not raise the level of the flooring unnecessarily much. That results in a great option for remodeling.

Most of these electric radiant systems can be installed easily where warm floors are appreciated, including bathrooms, mudrooms, and kitchens. As their own thermostat controls them, so they do not replace your main heating unit rather they augment it.

Similarly, other part of any popular electric floor heating system is an insulation board, which will save your hard-earned money when used in conjunction with radiant floor heating by acting as a very efficient thermal barrier. They reflect the radiant heat upwards instead of allowing the heat to be absorbed by the concrete. That results in a lot of time, energy and money.

Other important parts are thermostats, which are being used in almost every heating mechanism or method. These fully programmable thermostats save you heating costs by turning your heaters on only when you need a heated floor. Actually, an electric radiant heat sensor fitted under the tiles controls your Claremont radiant heating.

Source: http://www.accurateelectricalservices.com/CA-Electrician/floor-heating/claremont-electric-floor-heating-systems

electrical construction electrical works

New Ways To Save Money

There are other ways you can save money in addition to energy efficient lighting. Businesses can also get a rebate from APS and SRP for installing programmable thermostats and vending machine controls. Call 602-943-6120 for more information on these money saving options. Need an Electrician? Call 602-943-6120 or schedule online atselectricinc.com/electrician ATS Electric, Inc.

Source: http://blog.atselectricinc.com/2014/04/new-ways-to-save-money/

electrical estimating licensed electricians residential electrician electrician company electrician tools

Beautiful Progress (Book review, ‘Smaller Faster Lighter Denser Cheaper’)

A few years back a YouTube video of the comedian Louis CK went viral on the internet. Speaking on the Conan O’Brien show, CK called on people to reawaken their sense of wonder at the unprecedented technological marvels of the modern world:

We live in an amazing amazing world… Everybody on every plane should constantly be going “oh my God! Wow!” You’re sitting in a chair in the sky. People say there’s delays on flights. Delays, really? New York to California in five hours. It used to take 30 years.

Robert Bryce’s Smaller Faster Lighter Denser Cheaper: How Innovation Keeps Proving the Catastrophists Wrong, published this month by Public Affairs, does not feature Louis CK’s comic rant, which is too bad, as the book is in many ways an extended reflection on the same theme.

As the book details, the last few hundred years have seen a relentless trend towards getting more from less through increased efficiency. As Bryce describes the trends:

Our desire to do more work and exchange more information is making our computers Smaller Faster. From food packaging to running shoes, nearly everything we use is getting Lighter. More precise machinery is making our engines and farms Denser. And always – always – innovators are driving down costs and making goods and services Cheaper.

A Little Better All the Time

Part of the fun of Bryce’s book comes from the sheer range of his examples. In one chapter, we learn how the weight of the Tour de France winner’s bicycle fell by more than half between 1903 and 2003, before the Tour stepped in and imposed minimum weight requirements for competing bicycles).

In another, Bryce shows how using cell phones to transfer money in the developing world instantly raised salaries of Afghan policemen by 30 percent (due to the fact that corrupt officials could no longer skim from their paychecks before they were delivered).

From the Haber-Bosch (which helps synthesize the fertilizer needs to grow crops to feed billions) to MOOCs (which have the potential to revolutionize higher education), nearly every aspect of modern life has been and is being and improved by the trend towards greater efficiency.

Even where Bryce’s examples are well known, he has a way of bringing them to life. Moore’s Law, which says that computing power (measured by the number of transistors on an integrated circuit) is almost a common place. Yet the implication of this trend over the course of half a century, to quote Bryce quoting Ray Kurzweil, is that a “kid in Africa with a smartphone is walking around with a trillion dollars of computation circa 1970.”

Bryce is careful to acknowledge that innovation is not an unalloyed good. One of his examples of innovation in action is the AK-47. And he notes that many times innovation helps to solve one problem, only to create others (which in turn are solved by further innovations). But the overall picture that emerges is of a world made much brighter by human ingenuity.

The Cult of Bigness

One interesting feature of the curve of modern innovation is that while increased efficiency has trended toward smaller and lighter production, it hasn’t always been conceived that way. Sixty years ago, the conventional wisdom was nearly the opposite.

Economies of scale meant that bigger was better, and giant projects such as the electrification program of the Tennessee Valley Authority were seen as being the paradigm of efficiency. Not coincidentally, this era saw a move toward more government control in the west as well as fears that the Soviet economy would outpace free economies through more efficient planning.

Inevitably, this cult of bigness provoked a reaction, typified by E. F. Schumacher’s Small is Beautiful and many modern environmentalists. Yet many of the same people ended up rebelling against bigness only to embrace the wrong kind of smallness. They argued for smallness in production (fewer people, consuming less), rather than the smallness in the effort needed to produce.

Today, the environmental movement often expresses itself in what Bryce rightly describes as “an anti-human outlook.” One plan put forward in 2010 by Bill McKibben, calls for reductions in consumption so severe that “the average Bangladeshi would be required to cut his/her energy use by about half.” By demonstrating how growth has (counter-intuitively to some) helped to lessen humanity’s impact on the environment, Bryce’s book brings into focus the kind of smallness that we should be aiming for.

Powering Innovation

One issue that is never fully addressed in Bryce’s book is the source and conditions for the Smaller Faster trend. It’s easy to forget, living in a world of iPhones and air conditioning, MRIs and jet engines, just how atypical life in modern industrialized countries really is. The ordinary existence for most of humanity throughout history, however, was, in the words of Thomas Hobbes, “poor, nasty, brutish, and short.”

Given the amazing creative abilities of human beings, why is it that the steady stream of innovations and improvements have, in effect, been limited to the last few hundred years, and just to certain parts of the globe?

Bryce never directly addresses this question, although he does offer hints. A large portion of the book, for example, is devoted to the key role that energy plays in enabling innovation and prosperity. As in his previous books Power Hungry and Gusher of Lies, Bryce persuasively punctures promoters of wind power and bio fuels, and argues for increased use of natural gas and nuclear power. But he could have gone further in showing how central energy is to enabling the trend towards increased efficiency that has driven all of Bryce’s many examples.

Source: http://www.masterresource.org/2014/05/beautiful-progress-bryce/

electrical construction electrical works

Central Air Conditioner DIY

Central air conditioners provide cooling for your whole house. With a centrally located furnace, a condensing coil, and an evaporating coil, your house will be equipped with the a capable cooling unit. Owning a central air condition can prove to challenging at times unless you keep up with the maintenance of the various parts of the unit and know how to keep it running efficiently. Before you install a central air conditioner, you'll need to know what the square footage of the house is. Sizing air conditioners is made easy in the following articles. Your air conditioner is your cooling friend, so take care of your friend and it will take care of you on those oh, too hot days of summer. Let's take a closer look at central air conditioning and how to maintain them properly.

...

Read Full Post

Source: http://electrical.about.com/b/2014/05/09/central-air-conditioner-diy.htm

electrical commercial electrician contractor contractor electrician electrician electrical contractor journeyman electrician

Leviton occupancy sensing CFL lamp holder light fixture

Retrofit installations often cost less if we can leave out the manual switch, and in the long run an automatic occupancy- or light-sensing fixture can […]

Licensed Electrician Robert Monk
Leviton occupancy sensing CFL lamp holder light fixture
Copyright Robert Monk, 2012

Source: http://www.phillylicensedelectrician.com/leviton-occupancy-sensing-cfl-lamp-holder-light-fixture/

electric contracting electrican

The Benefits of Hiring a Professional San Dimas Electrician

If you are like most homeowners, changing a light bulb is about the extent of your electrical repair abilities. Fortunately, there are qualified San Dimas electrical repair contractors just a phone call away. Electrical repairs are one of those things that homeowners eventually have to contend with, and there are several issues at stake that warrant a second thought about any D.Y.I. ideas or who the best option to hire is.

The biggest and probably most important issue regarding electrical repair is safety. Most homeowners do not have the proper training to go mucking about with wiring, outlets and breakers. There is a good chance of coming into contact with electricity and some homeowners are not even aware of how to turn off the electricity to their home, which is important in the prevention of electrocution. Furthermore, if electrical repairs are not completed correctly, there is the chance of an electrical fire starting later on. What is risky for a homeowner to try on their own can quickly become a life or death matter for everyone living at the residence.

Another important issue in electrical repair is the ability of inexperienced people spreading damage to other parts of the home. An expert San Dimas electrical contractor can isolate electrical problems and contain them. They can tell if it can affect other parts of the house or whether a problem elsewhere is causing the problem that you notice. And goodness forbid if an inexperienced person were to get in there and end up destroying your home’s electrical system due to unwitting error.

The last important issue that should not prevent you from calling a professional San Dimas electrician is cost. While considering cost is important in this day and economy, the cost of getting something done right is never too high. Plus, getting it done right the first time prevents more repair down the road, meaning more out-of-pocket expenses.

Source: http://www.accurateelectricalservices.com/CA-Electrician/electrical-contractor/benefits-hiring-professional-san-dimas-electrician

construction electrician able electric auto electrical repair construction electrical

Thursday, May 29, 2014

A Guide To Choosing Ceiling Lights For Your Bathroom

Have you ever heard the saying ‘a change is as good as a holiday’? There is plenty of truth to this statement; take, for example, changing the ceiling lights in your bathroom – this small act alone could make it feel like a whole new space. There is more to this decision, however, than just walking into a showroom, pointing at a fixture you like and saying ‘that one’. Use this guide to ensure that you are making the right choices for your bathroom in regards to San Gabriel Valley lighting.

Our bathrooms need to be functional above everything else, and the ceiling lights that you ultimately choose for your space will help to determine with this is the case. There is no point in installing a fixture that looks stunning if it prevents you from completing all of the tasks that you would normally undertake in the space, such as shaving and applying make up. This is not to say, however, that homeowners should forget about the aesthetics of their lighting fixtures – instead, it is about finding a balance.

One way to achieve this is by choosing ceiling fixtures that you can easily adjust in both direction and levels of illumination.

  • Illumination: the best way to control the level of illumination in your bathroom is by installing dimmer switchers in conjunction with your ceiling lights. You could also opt for the traditional fixture that includes both heat and normal lights. Whilst this only gives you the choice of two levels of brightness, it may be sufficient for your needs.
  • Direction: the best way to control the direction of lighting in your bathroom is by installing ceiling lights that are mounted into moveable supports. Halogen and LED lights are often mounted in this way, and their fixtures allow you to point the lights in the direction that you need the most illumination (such as over the vanity or the shower stall).

 

Thankfully, there is plenty of aesthetically pleasing ceiling lights out there that also achieves adequate illumination that can be dimmed or brightened and directed to a certain area. Recessed lights and downlights sit flush with the ceiling and appear as if they’re not even there during the day, whilst a chandelier will make a luxurious and elegant statement. If going for a ‘wow-factor’ fixture, such as a pendant or chandelier, it is recommended that you do the rest of your bathroom as minimalist as possible to avoid overpowering the space.

 

Source: http://www.accurateelectricalservices.com/CA-Electrician/lighting/guide-choosing-ceiling-lights-bathroom

electrical contractor in what is an electrical contractor

About

Enlighten Electric is a C2 licensed electrical contracting company (#75693) based in Las Vegas, NV.  We believe in keeping close contact with our Clients and General Contractors to make sure that work is complete and on time.  Being a small company we keep a low overhead and do our best to keep costs down and [...]

Source: http://www.enlighten-electric.com/2011/09/about/

electrical services electrical parts home contractors electrician jobs electrical installation

One less guzzler on Philly streets: go EVs!

20A, 240v Leviton charger supplies Chevy Volt at reserved EV parking spot in tough-to-park South Philly. Custom vandal-resistant enclosure by Robert Monk Electric. Contact Robert […]

Licensed Electrician Robert Monk
One less guzzler on Philly streets: go EVs!
Copyright Robert Monk, 2012

Source: http://www.phillylicensedelectrician.com/one-less-guzzler-on-philly-streets/

electrical repairs find a contractor

When to Replace Smoke Alarms

 When to Replace Smoke Alarms  In the January-February edition of the NFPA Journal, a publication of the National Fire Protection Association - The Authority on Fire, Electrical & Building Safety, writer Amy Lebeau wrote an article entitled "Close to Home - A friends near miss, and a viral challenge to improve smoke-alarm awareness".   In Amy's NFPA article she tells a story of her friend Brook, who recently had a serious fire in her home. And Brook's 2 children smelled the smoke first and got their mom, grandmother and their baby brother out of the house.   The scarier part, was that when Amy heard Brook tell the story, Amy asked Brook if she heard smoke detectors go off in the home, and Brook said, "no". Amy goes on to say that Brook and her husband thought they had adequate coverage with smoke detectors all over the house, in the necessary spots. What they didn't realize is that they did not work.   Smoke detectors need to be changed at minimum every 10 years. A smoke alarms ability to detect smoke becomes less reliable over the years, making it more likely that it won't respond when its needed most!   Amy Lebeau then polled her friends to see if any of them knew about smoke detectors life span of 10 years. None of them did, they were all over the map.   Amy suggests the following. 1. Know the importance of testing your smoke alarms monthly. 2. Have an interconnected smoke alarm system in the home, meaning if one detector alarms the presence of smoke, they all alarm. 3. Have both ionization and photo-electric type smoke alarms, this means having two different detection methods for redundancy and accuracy. 4. Replace them every 10 years minimum. 5. Have a detailed home fire escape plan.   At Cooper Electric we specialize in providing our customers with adequate smoke detector coverage. Our residential department can help you with questions and product information. Add this detail on your next electrical service call, while we are already in your home, to provide you with great value!  

ico tag When to Replace Smoke Alarms  Tags:  

Del.icio.us
delicious When to Replace Smoke Alarms
Facebook
facebook icon When to Replace Smoke Alarms
TweetThis
tweet When to Replace Smoke Alarms
Digg
digg When to Replace Smoke Alarms
StumbleUpon
stumble When to Replace Smoke Alarms


Copyright © Cooper Electric [When to Replace Smoke Alarms ], All Right Reserved. 2014.

Source: http://cooper-electric.net/replace-smoke-alarms/

commercial electric electric contractor contractor electric electrician job electricians jobs

Upgrade Your Warehouse Lighting

Are you a business with a warehouse? What is your current lighting system? If it hasn’t been upgraded recently, it’s probably full of energy consuming Metal Halides. We can replace those with T8 or T5 High Bays and reduce the used wattage by half. Not to mention, your utility company will cover part of the […]

Source: http://blog.atselectricinc.com/2014/05/upgrade-your-warehouse-lighting/

electrical contractors in electrical contractors

Water and Electricity Don't Mix

In the aftermath of water damage, whether it be a flood or a busted water pipe, it is necessary to understand the potential hazard that exists.

First, water can be an unintentional conductor of electricity, so whenever water comes in contact with electrical components, a potential hazard exists. After a flood or pipe burst, water remaining in the buildings, machinery, switches, and other components of an electrical system poses a serious threat to life and to the proper operation of the system. Since even a small, undetected amount of moisture can be harmful, things that appear to be dried out can still be a potential hazard.  Second, Water causes rusting, or corrosion, especially among products that were never designed to be subjected to water. This rusting, which may be hidden from sight or take time to develop, can interfere with the proper operation of electrical components. For example, the mechanism of a breaker has internal workings made of metal, and these internal components could rust or corrode unseen inside the breaker and damage it to a point that it is inoperable. Often during or after even a heavy rain, your panel may become subject to water damage, and homeowners might experience seeing water leaking from the panel itself. This situation poses a problem.

ico tag Water and Electricity Dont Mix Tags:  

Del.icio.us
delicious Water and Electricity Dont Mix
Facebook
facebook icon Water and Electricity Dont Mix
TweetThis
tweet Water and Electricity Dont Mix
Digg
digg Water and Electricity Dont Mix
StumbleUpon
stumble Water and Electricity Dont Mix


Copyright © Cooper Electric [Water and Electricity Don't Mix], All Right Reserved. 2014.

Source: http://cooper-electric.net/water-and-electricity-dont-mix/

electrician company electrician tools electrician commercial commercial electrician electrician companies